CART (0)

Your shopping cart is empty

View Cart
Close

Please select your country or region to be
directed to the appropriate Lesker site.

Representative Image
Edwards EM Series (Small) Edwards EM Series (Small) 1 Edwards EM Series (Small) 2 Edwards, E2M0.7

Edwards EM Series (Small)

E2M0.7 / 1.5

The E2M0.7 and E2M1.5 pumps are two-stage, direct drive, sliding vane pumps. The pump is oil-sealed and designed for reliable, long-term operation. The pump is a free-standing unit. The drive is provided through an Oldham coupling by a totally enclosed fan cooled single phase motor. The pump is well suited for scientific applications such as backing turbomolecular pumps and general laboratory applications.

Applications

  • Analytical instruments
  • Leak detectors, helium
  • Research and development
  • Backing turbomolecular pumps

Features and Benefits

  • E2M0.7 has very low sound level of 43dB(A)
  • The pump is designed for reliable, long-term operation
  • Compact dimensions
  • Low energy consumption
  • Low operating temperature will minimise the heat load on the equipment
  • The pump is a free-standing unit
  • The motors are totally enclosed and are cooled by the motor-cooling fan and protected by a thermal overload device
  • Full height O-ring sealed oil sight glass for easy checking of oil level and condition
  • Gas ballast valve for water vapour handling capacity
  • Approved to EN61010, CSA, C22.2 and UL61010

EM18 & EM 28

The EM range of oil-sealed rotary pumps - renowned for their high ultimate vacuum, rapid pumping speed, quiet operation and ability to handle vapour - have become the industry standard for laboratory and light industrial applications. The pump is a freestanding unit with the drive provided through a flexible coupling by either a single-phase or three-phase (four pole) motor.

Applications

  • Analytical instruments
  • Leak detectors, helium
  • Research and development
  • Backing turbomolecular pumps
  • Automotive
  • Beam lines and high energy physics
  • Centrifuges, ultra-high speed
  • Coating

Features and Benefits

  • The pump is designed for reliable, long-term operation
  • Thermal overload device prevents overheating (single phase only)
  • The drive is provided through a flexible coupling by a single-phase or three-phase (four pole) motor
  • The motors are totally enclosed and are cooled by the motor cooling fan
  • Full height O ring sealed oil sight glass for easy checking of oil level and condition
  • Large sight glass and operating oil range

Dimensional Drawings

 
BOCEd E2M07 BOCEd E2M15 BOCEd E1M18 BOCEd E2M18 BOCEd E2M28

Charts

 
E1M Imperial E1M Metric E2M Imperial E2M Metric

Product Brochure
For the full brochure on this product, please click here.
Vacuum Pump Repair
& Services
World class service center for scheduled maintenance, evaluation, and vacuum pump repair.
Request a Service Quote
Request a Pump RMA
Remanufactured Vacuum Pumps
Click here to view a list of remanufactured vacuum pumps available from The KJLC's Remanufactured Vacuum Pump Division.
Product Cross-Reference Inquiry
Click here to fill out our form and KJLC can cross-reference your vacuum product and suggest either a replacement or equivalent product.
Pumps FAQ
Click here for answers to some of the most common questions we are asked.
Contact Us
Contact Us
Questions? Let's Talk!
Contact your dedicated Lesker sales team today.
+1 800 245 1656

Specifications Table

Pump Model E2M0.7 E2M1.5 E1M18 E2M18 E2M28
Pumping Speeds
50 (Hz)
0.44 CFM
0.75 m3/hr
60 (Hz)
0.50 CFM
0.85 m3/hr
50 (Hz)
0.94 CFM
1.60 m3/hr
60 (Hz)
1.18 CFM
2.00 m3/hr
50 (Hz)
10.0 CFM
17.0 m3/hr
60 (Hz)
12.0 CFM
20.4 m3/hr
50 (Hz)
10.0 CFM
17.0 m3/hr
60 (Hz)
12.0 CFM
20.4 m3/hr
50 (Hz)
16.2 - 19.0 CFM
27.5 - 32.2 m3/hr
60 (Hz)
19.5 - 22.3 CFM
33.1 - 37.9 m3/hr
Max Water Vapor
Pumping Rate
(with gas ballast)
8.00 g/hr 16.0 g/hr 650 g/hr 300 g/hr 700 g/hr
Ultimate Pressure
Total Without Gas Ballast
3.00×10-3 mbar
2.25×10-3 Torr
Total Without Gas Ballast
1.50×10-3 mbar
1.13×10-3 Torr
Total Without Gas Ballast
3.00×10-2 mbar
2.25×10-2 Torr
Total Without Gas Ballast
1.00×10-3 mbar
7.50×10-4 Torr
Total With Gas Ballast
0.20 mbar
0.15 Torr
Total Without Gas Ballast
1.00×10-3 mbar
7.50×10-4 Torr
Cooling Method(s) Method
Convection
Method
Convection
Method
Convection
Method
Convection
Method
Convection
Motor Power HP (kW) 0.12 (0.09) 0.21 (0.16) 1.01 (0.75) 1.01 (0.75) 1.21 (0.90)
Inlet Flange KF10
KF10
KF25
KF25
KF25
Exhaust Flange 11mm
11mm
15mm NPT
15mm NPT
15mm NPT
Oil Type(s) Hydrocarbon Oil
Part: KJLSS19Q1
Hydrocarbon Oil
Part: KJLSS19Q1
Hydrocarbon Oil
Part: KJLSS19Q1
Hydrocarbon Oil
Part: KJLSS19Q1
Hydrocarbon Oil
Part: KJLSS19Q1
Oil Capacity Quarts (Liters)
*Unless otherwise noted
0.34 (0.32) 0.34 (0.32) 1.47 (1.40) 1.10 (1.05) 1.47 (1.40)
Noise db(A) 54.0 54.0 57.0 57.0 57.0
Compression Stages 2
2
1
2
2
Series Standard
Standard
Standard
Standard
Standard
Weight Lbs (kg) 22.0 (10.0) 22.0 (10.0) 84.0 (38.0) 91.0 (41.0) 97.0 (44.0)
Dimensions in. (mm.)
(W/D/H)
5.59 x 12.7 x 9.37
(142 x 323 x 238 )
5.59 x 12.7 x 9.41
(142 x 323 x 239 )
9.49 x 20.4 x 6.38
(241 x 518 x 162 )
9.49 x 20.4 x 6.38
(241 x 518 x 162 )
Lubrication Type Wet
Wet
Wet
Wet
Wet
Technology Type Rotary Vane - Direct Drive
Rotary Vane - Direct Drive
Rotary Vane - Direct Drive
Rotary Vane - Direct Drive
Rotary Vane - Direct Drive
X CLOSE
Notes:
  • special case note
    ATEX versions available; please call or visit our website for more information.
  • special case note
    Hydrocarbon prepared pumps will be shipped with one charge of oil.
  • special case note
    Power cord is not included and will need to be purchased separately based on regional plug type.
  • special case note
    PFPE prepared pumps will require purchase of PFPE oil separately.

Ordering Table

X CLOSE
More
Info
Pump Model Inlet Flange Voltage & Phases Manual Description Part Number Price Ready to Ship Add To Cart Accessories
More
Info
Pump Model Inlet Flange Voltage & Phases Manual Description Part Number Price Ready to Ship Add To Cart Accessories
E2M0.7 KF10 100-120 VAC, 50/60 Hz, 1-Ø Download PDF Edwards Vacuum E2M0.7 Rotary Vane Pump, Hydrocarbon Oil, KF10 inlet flange, 0.75 m^3/hr at 50Hz / 0.5 CFM at 60Hz, Convection cooling, 100-120 VAC, 50/60 Hz, 1-Ø, Mains Cable Not Included A37141902View A37141902 Specific Information $3,497.00 KJLC will contact you
View Available Accessories
E2M0.7 KF10 200-230 VAC, 50/60 Hz, 1-Ø Download PDF Edwards Vacuum E2M0.7 Rotary Vane Pump, Hydrocarbon Oil, KF10 inlet flange, 0.75 m^3/hr at 50Hz / 0.5 CFM at 60Hz, Convection cooling, 200-230 VAC, 50/60 Hz, 1-Ø, Mains Cable Not Included A37141919View A37141919 Specific Information $3,048.00 KJLC will contact you
View Available Accessories
E2M1.5 KF10 100-120 VAC, 50/60 Hz, 1-Ø Download PDF Edwards Vacuum E2M1.5 Rotary Vane Pump, Hydrocarbon Oil, KF10 inlet flange, 1.61 m^3/hr at 50Hz / 1.18 CFM at 60Hz, Convection cooling, 100-120 VAC, 50/60 Hz, 1-Ø, Mains Cable Not Included A37132902View A37132902 Specific Information $3,676.00 KJLC will contact you
View Available Accessories
E2M1.5 KF10 200-230 VAC, 50/60 Hz, 1-Ø Download PDF Edwards Vacuum E2M1.5 Rotary Vane Pump, Hydrocarbon Oil, KF10 inlet flange, 1.61 m^3/hr at 50Hz / 1.18 CFM at 60Hz, Convection cooling, 200-230 VAC, 50/60 Hz, 1-Ø, Mains Cable Not Included A37132919View A37132919 Specific Information $3,206.00 KJLC will contact you
View Available Accessories
E1M18 KF25 115/200-230 VAC, 50/60 Hz, 1-Ø Download PDF Edwards Vacuum E1M18 Rotary Vane Pump, Hydrocarbon Oil, KF25 inlet flange, 17 m^3/hr at 50Hz / 12 CFM at 60Hz, Convection cooling, 115/200-230 VAC, 50/60 Hz, 1-Ø, Mains Cable Not Included A34317984View A34317984 Specific Information $6,777.00 KJLC will contact you
View Available Accessories
E2M18 KF25 115/200-230 VAC, 50/60 Hz, 1-Ø Download PDF Edwards Vacuum E2M18 Rotary Vane Pump, Hydrocarbon Oil, KF25 inlet flange, 17 m^3/hr at 50Hz / 12 CFM at 60Hz, Convection cooling, 115/200-230 VAC, 50/60 Hz, 1-Ø, Mains Cable Not Included A36317984View A36317984 Specific Information $7,988.00 KJLC will contact you
View Available Accessories
E2M28 KF25 115/200-230 VAC, 50/60 Hz, 1-Ø Download PDF Edwards Vacuum E2M28 Rotary Vane Pump, Hydrocarbon Oil, KF25 inlet flange, 27.5 m^3/hr at 50Hz / 19.5 CFM at 60Hz, Convection cooling, 115/200-230 VAC, 50/60 Hz, 1-Ø, Mains Cable Not Included A37317984View A37317984 Specific Information $9,367.00 KJLC will contact you
View Available Accessories
CloseX
X CLOSE
Your Ultimate Vacuum Pump Selection Guide is Here!
Pump Selection Guide
Find your perfect pump with ease! Our NEW comprehensive Vacuum Pump Selection Guide allows you to cross-reference over 450 vacuum pumps, search various pump types based on multiple criteria, and offers both new and remanufactured options. Still can't find the vacuum pump you're looking, click here to contact us.
Contact Us - Edwards EM Series (Small)