High performance magnetically-coupled linear devices, designed for sample transfer where only linear motion is required and rotation is undesirable. Available in standard stroke lengths from 304mm to 1524mm with motorisation options. The SLPP is bakeable to 200°C without removing any components.
Features
- Anti-rotation system ensures straight inline motion
- Unrivalled axial coupling strength
- Exceptional axial stiffness
- Zero backlash under low load
- Bakeable to 200°C without removing any components
The Linear PowerProbe should be selected where only linear motion is required and twisting or turning of the sample would be undesirable.
An anti-rotation system is fitted ensuring straight, in-line motion. This guarantees no rotation during the stroke.
In addition to the LPP series, the SLPP improves the load carrying capability with a maximum cantilevered moment of 50Nm.
The SLPP can be fitted with a bakeable limit switch for the retracted position, aiding system interlocks. It can also be motorised with a leadscrew or ballscrew option, suitable for automated sample transfer.
Specifications Table
| System mounting flange size | CF63 (4 1/2" OD) with clear holes |
| Magnetic linear breakaway thrust | 180N (41 lbs) |
| Available stroke range | 304mm to 1524mm |
| Output shaft - end interface details | 31.7/31.55mm with M8 tapped hole |
| Bakeout temperature | 200°C (80°C ballscrew option) |
| Shaft radial run out | N/A |
| Shaft radial deviation (linearity) over full stroke | +/- 1 degree |
| Maximum cantilevered load | 50Nm (442 in-lbs) |
| Maximum working axial load | 90N (20 lbs) |
| Retracted position switch - type | Bakeable micro switch wire to WD-020 |
| Stepper motor option | AS5918L4204 Motor with 5:1 Gearbox |
| Stepper motor - motor wiring | Wired to M12 5-pin. |
| Stepper motor option - switches | Bakeable limits and home switches wired to WD-030 terminating with a 6 Pin Lemo connector |
| Stepper motor maximum linear speed | Ballscrew option up to 100mm/second |
| Linear resolution per 1/2 step | Ballscrew option : 10 microns per half step |
| Motor option - ballscrew pitch | 20mm |
| Encoder Linear axis type and resolution | Renishaw LM10, 10 micron incremental terminating with a D type Connector |
