Pascal C2 Semiconductor Compatible Series:
These pumps share the chemical-resistant features of the C1 series but differ in ways that increase their resistance to chloro- and fluoro-containing gases found in semiconductor processing.
- Vanes in both stages are made from a composite material that provides high chemical resistance
- Inlet and exhaust hardware is made of stainless steel
- Oil level sight tube is made from Lexan® to avoid HF etching
- An inert gas bubbler system, in place of the air ballast, works both to cool and to degas the oil
- A special epoxy paint coats the oil casing for additional protection to the pump
Motor Types:
- Pascal pumps are available with either 1-∅ or 3-∅ motors
- Both types are compatible with low and high voltage ranges given in the specification table
- 1-∅ motor features additional advantages - voltage change is made by a simple rocker switch
Specifications Table
| Pump Model | 2063C2 (Discontinued) |
|---|---|
| Pumping Speeds |
50 (Hz)
35.3 CFM 60.0 m3/hr
60 (Hz)
42.4 CFM 72.1 m3/hr |
|
Max Water Vapor Pumping Rate (with gas ballast) |
1200 g/hr |
| Ultimate Pressure |
Total Without Gas Ballast
3.00×10-3 mbar 2.25×10-3 Torr |
| Cooling Method(s) |
Method Convection |
| Inlet Flange | KF40 |
| Exhaust Flange | KF40 |
| Oil Type(s) |
PFPE
Part: MFY25/6-5KG |
| Compression Stages | 2 |
| Weight Lbs (kg) | 205 (93.0) |
| Lubrication Type | Wet |
| Technology Type | Rotary Vane - Direct Drive |
X CLOSE
