Soft start valves are used to throttle the gas flow in roughing lines. They prevent turbulences in piping and containers, particulate contamination in vacuum installations, detachment of substrates by turbulences.
The Series 31.1 soft-start valves consist of two halves of throttle flaps supported on a common axis and maintained in the open position by a spring. The axis is held in an ISO-KF centering ring that is formed as a body with valve seat. When mounting them between two ISO-KF flanges (instead of a centering ring), the open flaps must be orientated against the air flow in the vacuum line. When the roughing system goes into operation, a strong air flow occurs in the roughing line, which immediately closes the valve and reduces the pipe section by about 99%. When reaching a differential pressure of approx. 15 mbar, the valve opens and leaves the pipe section nearly unobstructed for further pumping.
Key features of the 31.1 Soft Start Valve
Features
- Spring‑loaded open position, mechanical operation
- ISO‑KF centering‑ring integration
- Reduces pipe cross‑section by roughly 99%
- Reopens automatically at 15 mbar/11 Torr differential pressure
Benefits
- Automatic (differential) pressure‑based operation minimizes operator error and ensures consistent behavior
- Slows initial pressure drop, reducing stress on pumps
- Prevents turbulence and particle movement
- Easy retrofit into existing ISO‑KF systems without modification
Specifications Table
| Manufacturer |
VAT
|
|---|---|
| Series |
31.1
|
| Temperature |
Max Body ≤150 ºC ≤302 ºF |
|
Shaft Seal Type |
Fluorocarbon (FKM)
|
|
Cycle Life |
100,000 |
|
Normal Position |
Open
|
|
Mounting Orientation |
Any
|
|
Valve Body Material |
Aluminum & Stainless Steel
|
