Easy close, reliable isolation
The 54.1 All-Metal Angle Valve is equipped with FLEX VATRING, a “hard on hard” sealing technology. This dynamic, all-metal sealing system is characterized by consistent sealing and constant closing forces. It enables high sealing forces with comparable low axial forces. The sealing partners are made from stainless steel and they are deformed elastically only. The FLEX VATRING is easily exchangeable on side. It may be baked to 300 °C in open and close position and is capable of a lifetime of over 1000 cycles when operated under clean conditions.
Already installed in thousands of demanding applications under various process conditions, the 54.1 series has proven its outstanding reliability. It has become the standard solution for vacuum isolation in UHV and XHV applications.
No torque wrench is required as the valve is easy to operate with a standard hexagon wrench. With its robust design and a high conductance the valve is suitable for many different vacuum applications.
A key feature of the 54.1 series is that the FLEX VATRING all-metal seal is easy to replace when the seal has worn out. While “hard-on-hard” all-metal seals often require re-machining of the valve seat, the 54.1 valve series is designed so that the replacement FLEX VATRING seals in a new area of the valve seat rather than in the same position as the former ring seal. The FLEX VATRING can be replaced twice due to its three-level sealing seat.
The standard flange is CF-R fixed in place.
Key features of the 54.1 UHV/XHV All Metal Angle Valve - Easy Close
Features
- High conductance
- FLEX VATRING all-metal, "hard-on-hard" sealing
- Easy close mechanism – no torque wrench required
Benefits
- Reliable performance under extreme UVH requirements
- No maintenance required within the specified life time
- Low cost of ownership
Specifications Table
| Manufacturer |
VAT
|
|---|---|
| Series |
54.1
|
| Pressure |
Torr Min: 7.50×10-8 Torr Max: 1500 Torr mbar 1.00×10-7 mbar bar 2.00 bar |
| Temperature |
Actuator ≤300 ºC Valve Body ≤300 ºC |
|
Shaft Seal Type |
Metal
|
|
Cycle Life |
1,000 |
|
Normal Position |
Any
|
|
Mounting Orientation |
Any
|
|
Valve Body Material |
Stainless Steel
|
|
Valve Seal Material |
Metal
|
