CART (0)

Your shopping cart is empty

View Cart
Close

Please select your country or region to be
directed to the appropriate Lesker site.

900i Series In-Line Sputtering Systems

Precision Batch Sputtering for Application-Critical Thin Films

Overview

Overview

KDF is a leading developer and manufacturer of in-line sputtering systems, known for delivering reliable, high-throughput solutions across a wide range of industries. All KDF systems are engineered for versatility and performance at the industry's lowest cost of ownership. These systems are widely used in:

  • Mainstream silicon
  • Emerging materials
  • Flat panel displays
  • Optical communications
  • Medical devices

KDF's in-line batch sputtering platforms are easier to operate and maintain than cluster tools. They offer measurable improvements in film uniformity, throughput consistency, process stability, and tool up time. Customers also benefit from enhanced automation, environmental health and safety performance, and a strong return on investment.

KDF partners closely with customers to develop tailored solutions that meet specific production goals. Whether optimizing for throughput, ROI, or time to market, KDF supports all existing equipment with upgrades and retrofits. As the OEM for MRC batch systems, KDF also provides full parts and service support for MRC products worldwide.

900i Series Highlights

The 900i Series comprising models 903i, 943i, 943ix, 954i, and 954ix is designed to meet the most demanding production requirements while offering the process flexibility typically found in R&D systems. These tools are ideal for thin film deposition in application-critical devices where uniformity and repeatability are essential.

The system features a horizontal cathode and substrate orientation, which allows for gentle fixturing and supports a wide range of substrate sizes. It accommodates a 12 inch by 12-inch substrate area and can process substrates up to 1.5 inches thick, with optional hardware available for 2 inch substrates. The 900i Series supports high-rate DC magnetron sputtering and both single- and multiple-pass deposition modes.

Users can process one 300 mm wafer or multiple smaller wafers per run, with convenient wafer-to-pallet loading. Optional configurations include a high-vacuum loadlock with quartz heater lamps for efficient substrate degassing, a planetary substrate pallet for enhanced film uniformity, and an integrated RGA for gas peak monitoring and process fault detection.

Cathode Technology

The 900i Series supports a wide range of cathode configurations to meet diverse material and process requirements.

  • Planar: RF and DC sputtering of all materials, targets bonded to copper backing plate
  • Inset: Upsilon or Mu for DC sputtering of metals with enhanced utilization, targets clamped to cooling well
  • Mark II: planar style cathode with optimized magnets for dielectric sputtering
  • Magterial: planar style cathode with high strength magnets for sputtering magnetic materials
  • LMM: Linear Moving Magnet, engineered for high-rate reactive processes, full-face erosion, and minimal particle generation

Optional gas delivery systems are available to support advanced reactive sputtering applications.

Enhanced Rotary Planetary Pallet (ERPP™)

For applications requiring exceptional film uniformity, the 900i Series can be equipped with KDF's proprietary Enhanced Rotary Planetary Pallet (ERPP™). When paired with KDF's cathodes, this configuration achieves uniformities better than ±1% across the pallet and repeatability better than 0.5% between runs for dielectric materials such as SiO₂ and TiO₂. This is a significant improvement over traditional pallet uniformities of ±15-20%.

Learn more about KDF Enhanced Rotating Planetary Pallet (ERPP™)

Model Highlights

903i

The 903i is optimized for contact metallurgy applications, offering pure metal target deposition and easy wafer-to-pallet loading for sputter-down processes. Its rough-pumped load lock enables fast production exchange cycles.

943i

Building on the 903i platform, the 943i adds a high-vacuum load lock with quartz heater lamps. It is ideal for producing application-critical thin films used in hybrid circuits for defense, aerospace, and space telecommunications. These applications demand high throughput and repeatable uniformity.

954i

The 954i is a four-target batch sputtering system designed for GaAs and other compound semiconductor applications. It supports both front and backside deposition, maximizing utilization and productivity.

943ix and 954ix (x Series™)

These models feature KDF's latest cathode designs, extended to 17 inches for improved uniformity across the entire pallet. x Series™ cathodes are available in Planar™, Inset™, and RF/DC LMM™ configurations.

System Specifications

Specification Value
Chamber Ultimate ≤ 1 x 10-7 torr
Chamber Leak Rate 20 min to 1 x 10-4 torr
High Vacuum Dome Ultimate ≤ 1 x 10-7 torr
High Vacuum Dome Leak Rate 15 min to 1 x 10-4 torr
Pump Down Time ≤ 110 min to 1 x 10-6 torr or overnight to 2 x 10-7 torr
Load Lock Vacuum Achieved using CTI-8 cryopump

System Hardware Features

  • 12 kW low stored energy DC power supplies (Advanced Energy), with optional Pinnacle Plus upgrades
  • Integrated stainless steel VAT valve for upstream or downstream pressure control
  • Fully automated self-locking top plate support system
  • Process gas control with up to four independent gas channels, each with feedback-regulated capacitance manometers and flexible gas selection
  • Stepper motor pallet carrier drive with optical encoder for precise positioning and scan velocity profiling
  • Low-pressure hydraulic system for safe and smooth operation
  • Load lock linear sensor with computer-controlled positioning for improved accuracy
  • Optional 1.25 kW RF solid-state power supply (Advanced Energy)
  • Optional pallet stacker replaces dual pallet shelf with a six-shelf hanger for sequential five-pallet operation
  • Compliant with NFPA79 safety standards

Computer Sub-System

The 900i Series includes a Windows based graphical user interface with a 24-inch touchscreen monitor mounted on a mobile HI cart. A context-sensitive recipe manager runs on a Microsoft SQL database, enabling real-time data display, logging, and reporting compatible with Excel, Lotus, and other Windows applications.

Optional SECS/GEM and OPC server interfaces allow integration with factory automation systems. The system uses a distributed Rockwell Control System with DeviceNet and Ethernet IP technologies. A built-in maintenance suite provides full diagnostics and manual control capabilities, and all electronics are housed in a service-friendly enclosed cabinet.

Facility Requirementss

Resource Specification
Power 208 VAC, 3-phase, 100 Amps
Water 6.5 GPM, 70 PSIG, 10°C-24°C
Compressed Air 85-100 PSIG
Process Gas 25 PSIG, 99.999% purity
Pure Gas Dry N2

SYSTEM CAPACITY

900i
Pallet Size:
12" x 12" (304mm x 304mm)
100mm Wafers 150mm Wafers 200mm Wafers 300mm Wafers
9 4 1 1

Production Targets Fitted for KDF Systems

We provide all configurations of targets and bonded assemblies for the 600, 700, 800 and 900 series KDF systems. As the system manufacturer, we are uniquely positioned to provide targets which perform at the highest level and meet the unique design requirements of the KDF sputtering systems.

Target materials will be provided in the correct configuration for the most demanding of applications - From R&D to high volume production.

Production techniques include:

  • Vacuum induction melting
  • Hot pressing
  • Hot isostatic pressing
  • Electron beam melting
  • Sintering

All targets will be inspected, cleaned and package for use as received. Special inspection, labeling and packaging can implemented upon request. Products will undergo thorough quality checks of the dimensions, purity and other required specifications.

An SDS in the specified language and Certificate of Analysis will accompany each target. All products are responsibly sourced and Conflict Minerals free. DFARs and ITAR compliant products are available upon request.

Mu Configuration

  • 4 Piece & Single Piece Designs
  • 15", 17", 24" & 30" Lengths
  • Common Materials: Ti, TiW, NiCr, NiV, Ta, Nb, Cr, Al, W, Mo, Ag, Ru - Others available upon request

Upsilon Configuration

  • 4 Piece Design
  • 15", 17" & 24" Lengths
  • Common Materials: Au, Pt, Pd - Others available upon request

Chi Configuration

  • 4 Piece & Single Piece Designs
  • 15" & 17" Lengths
  • Common Materials: Al, Al alloys, Cu

Standard Planar Configuration - Bonded Assembly

  • Single or Multi-tile Design
  • 15", 17" NTX & 24" Lengths
  • Common Materials: Au, Pt, Al, Al alloys, Ti, TiW, Ni, Co, NiCr, NiV, Ta, Nb, Cr, W, Mo, Ag, Ru, Si - Others available upon request

3" X 17" Cathode

  • Single or Multi-tile Design
  • Common Materials: Au, Pt, Al, Al alloys, Ti, TiW, Ni, Co, NiCr, NiV, Ta, Nb, Cr, W, Mo, Ag, Ru, Si - Others available upon request
Would You Like More Information?

Do you have any questions? Click below to get in contact with one of our many experienced team members.

CONTACT US TODAY
Contact Us - 900i Horizontal Batch-Sputtering System

▲
To Top